B2B Platform

LZ series Heavy-duty snow removal plow

This series of snow plows can be mounted on loaders, pickup trucks, and the fronts of large trucks for pushing snow and clearing road surfaces. There are various models to choose from, including LZ30XC, LZ32XC, LZ33XC, and LZ35XC.

Key words:

Snow Removal equipment,Snow Plow Attachments,Winter Road Maintenance,Snow Plow Blades

Classification:

Snow Removal Equipment

Email：sales@lukewei.com

Whatsapp：+8619513168716

Consulting

Product Details

Product profile and use

LZ series snow plow is the latest product produced by our factory based on many years of experience in producing snow plow and combining the advantages of this series of foreign products. The product can be installed on dump trucks and other heavy vehicles and loaders, equipped with its own DC hydraulic power unit, only need to connect with the original car battery can provide hydraulic power for the snow plow without affecting the power of the original car. The snow plow adopts a centralized control system, and the control box can be installed in the cab. The driver completes the full action of the snow plow by manipulating the button operation on the control box. The control mechanism is simple to install and can be removed at any time without affecting the performance of the vehicle. The product is a snow removal equipment developed according to the heavy snow in northern China, which can quickly remove the snow area of expressways and traffic roads, ensure the timely smooth and safe driving of the road, and improve social and economic benefits.

Structural composition

This series of snow plow is composed of:

1. front frame

2. front middle frame

3. rear middle frame

4. left and right hydraulic cylinder

5. connecting frame

6. plow knife assembly

7. Spring assembly

8. boom assembly

9. lifting hydraulic cylinder 10. Power unit 11. connecting plate

operational principle

1. With the help of the forward power of the car, adjust the total range of the snow plow to the tilt position of 30° through the buttons of the control mechanism, and push the snow to the edge of the road with the radian, tilt Angle and driving speed of the snow plow.

2. Automatic obstacle avoidance function

When the snow plow encounters obstacles in the operation process,

3.because the obstacle resistance greatly exceeds the pressure of the pressure spring of the self-lock device, the self-lock device automatically removes and the snow plow turns backward. When the obstacles pass, the snow plow is quickly reset by the pressure of the back pressure spring, and the self-lock device automatically locks the snow plow and can continue the operation.

Installation and operation

The LZ series snow plow can be installed on a variety of vehicle models, including trucks, water trucks, dung trucks and rear-mounted compression vehicles and wheeled construction machinery.

1. Confirm the safety requirements: the lowest point between the rear seat and the connection plate shall not be less than 260mm, and the connection strength of the connecting plate and the vehicle shall be greater than or equal to 50N / cm2。

2. 24v hydraulic power unit and snow plow mounting seat are fastened for 16mm2The main line is connected to the positive power supply of the vehicle, and the connection points of the main line must be locked to prevent the fire break.

3. Check whether the appearance, fasteners and hydraulic components are normal before opening the snow plow, and observe whether the hydraulic system is normal during debugging.

4. Control the left and right angles and rise and fall through the left and right buttons and lifting buttons in the cab.

5. The operation mechanism is simple to install, and can be disassembled at any time.

Use precautions and maintenance

1. The hydraulic power unit belongs to the short-term working equipment, the normal working time is within 120s, beware of the motor damage due to excessive heating of long-term working.

2. The viscosity of oil is 22-46 ㎡ / s, and the oil with low viscosity in winter.

3. Change the oil for the first time after 100 hours, and every 1500 hours later.

4. The pollution degree of working oil shall not be higher than that of ISO4406 and 18 / 14 refined oil, and it shall be filtered by 10-30um filter before use.

5. The hydraulic power unit needs sufficient current, and the equipped locomotive battery should have sufficient power, otherwise the power unit will not work.

6. In use, the compression spring of the spring can be adjusted according to the hardness of the road snow, but excessive adjustment will affect the ability of the snow plow to climb over obstacles.

7. Check the fastening screws and other fastening components and control circuits before work every day.

8. Check and clean the hydraulic filter for 150 hours to ensure the filter accuracy is 20 μ m.

9. Check the hydraulic oil quantity irregularly, fill in the 46 # anti-wear hydraulic oil and clean the filter.

10. Check the hydraulic components, pipes and connecting parts irregularly.

11. Regularly observe the wear degree of the blade steel plate. When the wear amount is more than or equal to 1 / 3 of the width of the blade, the blade should be replaced.

12. In non-work places, the snow plow of the vehicle must be raised before walking, and the walking speed shall not be greater than 40 ㎞ / h.

13. When the snow plow is idle, it should be cleaned and placed in a dry place to spray the paint part. The oil cylinder should be coated with oil to prevent corrosion.

Safety matters

1. Check whether the hydraulic part is normal before use.

2. Check the oil pressure system for no oil leakage during work, and the oil pipe is in good condition.

3. Cover the protective cover of each sports part during work to avoid injury.

4. Snow plow is a special equipment, please be operated by

Technical parameters:

product model	LZ30XC	LZ32XC	LZ33XC	LZ35XC
product size (m)	3×2.45×1.8	3.3×2.45×1.8	3.3×2.45×1.8	3.5x2.25x1.8
Effective Working Width (mm)	3000	3200	3300	3500
Total weight of thesnow plow is (㎏)	1070	1090	1100	1120
Push the ski left and right corner(°)	30°-35°	30°-35°	30°-35°	30°-35°
Maximum clearance from the ground (mm)	300	300	300	300
Barrier avoidance height (mm)	260	260	260	260
Snow removal thickness (mm)	≤200	≤200	≤200	≤200
Snowefficiency removal	≥90%	≥90%	≥90%	≥90%
hydraulic pressuresystem	The RMH DC hydraulic system unit	The RMH DC hydraulic system unit	The RMH DC hydraulic systemunit	The RMH DC hydraulic system unit
relieving tool	65 Mn high-wear-resistant steel	65 Mn high-wear-resistant steel	65 Mn high-wear-resistant steel	65 Mn high-wear-resistant steel
Working speed (㎞ /h)	15-30	15-30	15-30	15-30
Matching models	Vehicles above 10t orloaders of 30and above	Vehicles above10t or loadersof 20 and above	Vehicles 10t or loaders of20 and above	Vehicles above 10t orloaders of 20and above

Main technical parameters of the hydraulic system

Lift and deflection hydraulic system	brand	Yangzhou Ruiteng
	model	RMH-6254
	Motor type	A 24V DC motor
	power	2.2Kw
	pressure	16Mpa
	fuel tank capacity	4.0L
	electromagnetic directional valve	Model number 4WE6E6X / G24NZ5L
	hydro-cylinder	Domestic famous brand — — Sino-German Hydraulic

Fault analysis and troubleshooting

hitch	cause	The exclusion method
The plow plate is unbalanced at both ends	The lifting chain length is not consistent	Adjust the lifting chain to balance the ends of the plate
When working, the cornercylinder is not fixed ornot in place	1. The hydraulic oil isnot enough or too dirty. 2	1. Check whether the hydraulic oilneeds to be replaced or added. 2.Clean the valve core holes in theoverflow valve with kerosene.
Angle, lifting switch has noresponse	Circuit circuit circuit	check circuit

Features and advantages

Automatic obstacle avoidance	When the snow plow encounters an obstacle that exceeds thepressure of the compression spring, its blade can pivot to avoiddamage. Once the obstacle has passed, the blade quickly resets,allowing the operation to continue.
Automatic yaw	When driving, the snow pusher can conform to the road's inclination to maintain close contact with the road surface. The blade surface wears evenly, reducing the risk of road damage.
Made of 65Mn steel	This material is heat-treated at high temperatures, resulting in a hardness of HRC50-55, which enables it to achieve high strength and wear resistance.
Throttle valve	Effectively adjusts the speed of the hydraulic cylinder's extension and retraction.
Self-locking device	A self-locking device on a snowplow ensures secure attachment andstable operation, preventing accidental detachment and providingconsistent performance even on uneven terrain. It enhances safety,reduces manual adjustments, and lowers the risk of damage to boththe plow and the road surface.
Quick connect plate	A quick connect plate on a snowplow enables the rapid and secure interchange of various remover types, enhancing operational efficiency and versatility.