平度Over Three-meter Large Roller Brush

Product No.1:SWEEPSTER ROLLER BRUSH Maximum snow removal width： 3660mm
Product No.2: LKW3000、LKW3500、LKW3600ROLLER BRUSH Snow removal Width (mm)：3000～3600

Category:

平度Snow Removal Equipment

Tel: 0393-8799968

Product Description

Product No.1:SWEEPSTER ROLLER BRUSH

SWEEPSTER Roll the brush
characteristic: Integrating the advanced design concept of foreign rolling brush, combined with the domestic operating conditions and the actual needs of customers, we design and develop a structure with high rigid strength, reduce energy consumption, excellent performance, stable snow removal rolling brush; Polyethylene + wire bristles, high speed, can effectively remove snow on the ground; The bristles have a large diameter, and have good wear resistance, and have a long use cycle.
order number	project	parameter
1	outline dimension,mm:	435026001100
2	Maximum snow removal width, mm	3660
3	Left and right deflection angle, °	32
4	Left and right floating angle, °	5
5	weight,kg	1310
6	Brush sheet diameter, mm	Inner 254 / outer 915
7	Rolling brush rotation speed, r / min	240-300
8	Roll-brush line speed, km/h	39
9	Brush hair material	Polyethylene + metal wire
10	Motor brand	Eton
11	Motor displacement, and mL	395/195
12	Deflect the oil cylinder operation mode	Two levels of single action
13	Working speed, km/h	≤30
14	Motor drive mode	Motor direct connection brush shaft drive
15	Hydraulic system rated pressure, MPa	16

SWEEPSTER Rolling brush product advantages, characteristics

1. The whole rolling brush adopts the frame structure, with high strength and good reliability.

2. Rolling brush drive mode: using dual hydraulic motor drive, according to the actual working conditions, using one end of 390ml displacement motor, the other end of 195ml displacement motor, not only to achieve the purpose, but also reduce the energy consumption.

3. The ground clearance can be adjusted: the rolling brush has the brush head pressure function, sweep the ground clearance can be adjusted, effectively improve the utilization rate of bristles.

4. Large left and right Angle: using two deflection cylinders to achieve the left and right deflection.

5.Quick disassembly device: the roller brush and the chassis connection bracket are connected with a pin shaft, which can be quickly removed.

6. Up and down, left and right have floating function: the branch wheel and lifting device use flexible chain connection and rotating shaft and left and right, which can realize the imitation shape everywhere, realize the purpose of efficient snow removal and protection of rolling brush structure.

7. Hydraulic connection: quick connection and imported brand. Thus, the disassembly and installation can be quickly, and the accident rate can be reduced.

8.Support theory device: the rolling and sweeping support wheel adopts solid tires, with good support performance and good stability, and the added pull spring can be automatically adjusted with the direction of the vehicle passing, without manual intervention.

9. Safety warning device: operation warning lights are installed on both sides of the rolling brush, and the profile function is taken into account to ensure the safety of night operation.

10.The bristles are special-shaped single piece. The bristles are mixed with polyethylene and steel wire, with wear resistance, good elasticity, bending resistance, and no damage to the road surface.

Product No.2: LKW3000、LKW3500、LKW3600ROLLER BRUSH

Product details

一. Introduction of snow-rolling products:

Snow Removal Roller is efficient, energy saving, environmental protection, safe winter snow removal equipment. It is mainly composed of roller brush part, support wheel, rolling brush height adjustment mechanism, movable frame, fixed bracket, connection frame, pendant, hydraulic system, lighting system, etc. Snow Removal Roller is suitable for large and medium vehicles; large and medium loaders will not affect other functions of vehicles and can quickly remove snow on the road. Safe, reliable in use, stable and efficient in operation.

二. Working principle of Snow Removal Roller:

Push type snow roll, borrow the vehicle engine as the power source or loader hydraulic system, and then drive the motor to make the brush rotation, and then in the left and right offset 30° state to achieve the purpose of cleaning.

三. Characteristics and advantages of Snow Removal Roller:

1. "Independent operation of lifting deflection hydraulic system + Snow Removal Roller hydraulic system", specially equipped with hydraulic power unit to achieve independent lifting and deflection operation.

2. The snow removal device has operation lights, which brings convenience to bad weather and snow removal operations at night

3. There are anti-collision warning devices on both sides of the snow removal roll

4. The snow removal device has an auxiliary support wheel with buffer, anti-impact and self-correction.

5. The rubber support wheel has the characteristics of high elastic and solid wear resistance, and its diameter is Φ400mm.

6. The push-mounted snow roll adopts humanized design and simple operation. The whole operation and control process can be completed in the cab.

7. With a pressure feedback system, through the pressure feedback system, can ensure that the pressure of the snow brush in the uneven road driving process unchanged, to avoid too much pressure or too little pressure caused by the uneven road surface, resulting in the snow brush wear too fast or too little pressure due to the large pressure due to the cleaning.

四. Scope of application for Snow Removal Roller:

Equipped with vehicle equipment, flexible, widely used for high-grade highway, urban or township trunk road, airport, square, wharf, scenic road winter snow removal.

V. Basic parameters of Snow Removal Roller:

model		LTX3000	LTX3500	LTX3600
Overall dimensions (length, width and height)		3450×2500×1500mm	3950×2500×2000mm	4050×2500×2000mm
weight (kg)		1150	1280	1300
Snow removal Width (mm)		2600-3000	3030-3500	3050-3600
Operation speed (km/h)		10—25	5—25	5—20
Maximum left and right deflection angle		±30°	±30°	±30°
Snow removal and rolling brush width (mm)		3000mm	3500mm	3600mm
Snow removal Didiameter (mm)		810	810	810
Brush sheet thickness (mm)		50	50	50
Brush silk material		PP+ steel wire	PP+ steel wire	PP+ steel wire
Equipped with models		30 Loader and 16t heavy truck	30 and 30 loaders or heavy vehicles, if the vehicle cannot take force, add the auxiliary power station	30 and 30 above loaders or 16t and above heavy vehicles, can be added
Lift and deflection hydraulic system	model	RMH-6254
	Motor type	A 24V DC motor
	power	2.2Kw
	hydraulic pump	2.1ml/r
	pressure	16Mpa
	fuel tank capacity	4.0L
	electromagnetic directional valve	Model number 4WE6E6X / G24NZ5L
	The deflection hydraulic cylinder	Model number LKW 55 / 40250
	pressure	16Mpa
	hoist cylinder	Cylinder, LKW 80 / 45380
	pressure	16Mpa
The roller brush rotates the hydraulic system	Hydraulic motor model	Colson OMT-245
	displacement (ml)	245
	system pressure	16Mpa